DIY Bundle 250GB Mercury Electra 6G SSD And HDD Kit For IMac 27-Inch (Mid 2011)
With Mercury Electra 6G SSD and iMac HDD tool Kit (SSD specifications click here)
The complete solution for your 2011 iMac
Experience the extreme performance of an OWC SSD upgrade with this easy DIY SSD and hard drive replacement kit. Add an SSD to your hard drive equipped iMac to experience faster booting, near instant application launches and lightning-fast data transfer speeds.
Starts fast, stays fast
Even though many SSDs use low cost, less robust components in their design, they can still offer enticing short term bust speeds which are perfectly suitable for light duty uses. However, those drives are not designed to deliver consistent sustained speeds over their capacity rating, which results in a dramatic slowdown to even hard drive speeds under demanding use.
The fifth generation of Mercury Electra 6G SSD was built to start fast and stay fast at over 500MB/s sustained. Its development began with using the best flash storage components and technology available. Next, after being nearly completely filled to capacity with data, it had to deliver the same high speed as if it were empty. This drive doesn’t flinch at any time or capacity level and drop read/write speeds like other drives do…it easily handles the most extreme, mission-critical uses you can throw at it.
Upgrade Your iMac with Confidence.
OWC's in-line solution is the only hardware digital thermal sensor on the market allowing a third-party SATA drive to be installed in your iMac. A convenient, plug-and-play cable, the In-line Digital Thermal Sensor eliminates fan noise and maintains proper system fan control through the iMac's System Management Controller. This innovative device is designed specifically for the iMac, requires no software hacks and ensures compatibility with Apple's built-in diagnostic processes.
Maintains the highest performance while offering ultimate convenience
The NewerTech AdaptaDrive has been benchmark test proven to deliver the same data transfer rates as is experienced when a drive is connected directly to the SATA data bus. The AdaptaDrive doesn't create a bottleneck or any performance throttling...it delivers pure data pass-through performance and drive use convenience from any 2.5" SATA 1.5Gb/s, 3Gb/s, or 6Gb/s hard drive or SSD.
Please note, that before attempting to perform this installation, it is recommended you watch the associated instructional video in its entirety to determine your ability to perform this complex procedure. OWC assumes no responsibility for damage that may occur during the install.
(1) OWC Mercury Electra 6G SSD
(1) AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
(1) OWC In-line Digital Thermal Sensor Cable
(2) OWC 2-1/4" Suction Cup
(1) Torx T10 driver
(1) Torx T8 driver
(1) Nylon Pry Tool (Spudger)
(1) OWC Blue Microfiber Screen Cleaning Cloth
NOTE: This kit contains consumable and/or one-time-use components and therefore is non-refundable if opened. If you have any concerns about your ability to perform the upgrade, you can return the unopened kit for a refund.
The best warranty is one you never have to use - but should the need occur - we're proud to provide a superior level of support and service coverage to our customers.
5 Year OWC SSD Limited Warranty on the OWC Mercury Electra Pro 6G SSD
1 Year OWC Brand Standard Limited Warranty on the OWC In-line Thermal Sensor cable
5 Year NewerTech Product Limited Warranty on the NewerTech AdaptaDrive
Other DetailsiMac (27-inch Mid 2011) (May 2011) Model ID: iMac12,2 - A1312 - EMC - 2429 | 2.7GHz i5, 3.1GHz i5, 3.4GHz i7
iMac (21.5-inch Late 2011) (August 2011) Model ID: iMac12,1 - A1311 - EMC - 2496 | 3.1GHz i3
iMac (21.5-inch Mid 2011) (May 2011) Model ID: iMac12,1 - A1311 - EMC - 2428 | 2.5GHz i5 , 2.7GHz i5, 2.8GHz i7