|Controller||Silicon Motion SM2258XT|
|NAND||Micron 384Gbit 32-layer 3D TLC|
|4KB Random Read IOPS||75k|
|4KB Random Write IOPS||90k|
|Idle Power||340 mW|
|Write Endurance||295 TB|
|What's in the box||SSD; Quick Start Guide; Warranty Statement; 4 Screws|
|Dimensions (W X D X H)||3.93 x 2.75 x 0.26 in|
The Flexx ultra-speed and ultra-slim LX100 series SSD provides you ultimate performance over
traditional hard disk drive by achieving up to 530 MB/s/450 MB/s sequential read/write rate and up
to 85k IOPS (input/output operations per second) in CrystalDisk Benchmark test (Flexx 480GB).
Moreover, the ultra-slim 7mm height of Flexx LX100 series SSD makes it the best solution
for ultrabook or any storage application that needs ultra-high performance with height limitation.
Flexx LX100 series SSD provides high-level data protection and reliability by using a
combination of superior ECC algorithm up to 66 bits per 1K Byte and achieves longer SSD lifetime
by integrating lower write amplification and Wear Leveling Factor. (WLF)
By providing above-mentioned characteristics, Flexx LX100 series SSD is the best solution to
satisfy a variety of needs in industrial, military and consumer electronics storage applications no
matter in performance, power consumption, form factor and cost considerations. Moreover,
Flexx LX100 series SSD also integrates many advanced technologies for enhancing its
reliability such as intelligent Bad Block Management and Wear Leveling, intelligent Read Disturb
Management, Power/Performance Balancing and intelligent Recycling for advanced free space
The SSD is offered in a 2.5” form factor with a SATA connector.