Description
Transcend's Dual USB Car Lighter Adapter comes with one car charger, dual USB ports, and 8m and 4m cables.
Simultaneously power your front and rear dashcams while on the go.
Installation Guide
- Route the cable to your car power outlet. Hide the cable along the headliner, windshield, trim, or rubber. Keep the cable out of sight for a tidy appearance.
- Connect the micro USB to the dashcam.
- Connect the Type-A connector to the USB port of the car charger.
- Plug the car charger into the car power outlet to complete the installation.
Note: Transcend recommends having an experienced installer with proper knowledge of the vehicle install the device to ensure your safety. Transcend assumes no responsibility for any damage to vehicles in connection with an improper installation.
Dimensions | 39.72 mm x 20.7 mm x 26.13 mm (1.56" x 0.81" x 1.03") |
Weight | 424 g (14.96 oz) |
Cable Length | 8/4 m (26.25/13.12 ft) |
Input Voltage (Power cable) | 12V ~ 24V |
Output Voltage (Power cable) | 5V / 2.4A |
Fuse | 32V / 4A |
Note | This cable is for charging only. Data transfer is not supported. |
Supported Device | DrivePro 110 DrivePro 550 DrivePro 10 DrivePro 250 DrivePro 620 |
Certificate | CE/RCM/EAC |
Warranty | One-year Limited Warranty |
Warranty Policy | Please click here for more information about the Transcend Warranty Policy. |
Compatibility
DrivePro 110
DrivePro 550
DrivePro 10
DrivePro 250
DrivePro 620
Also compatible with other devices having USB-C port